BellMe Wireless Calling System

NURSE CALL SYSTEM PRODUCTS

Our Nurse Call Systems focus on patient and resident safety first whilst providing a unified view of meaningful information to Sisters, Nurses, Matrons and Managers. Watch our Product Overview video for a brief introduction to our products.

PRODUCTS - Receivers

nurse call systems

B-700
LED Light Receiver

Let our LED Light Guide you for quicker response time

This receiver can be installed above the ward or room entrance situated in the corridors.
It will flash & alert with or without sound. Cancel buttons must be present to disable the light.

nurse call systems

B-650
Wristwatch

Do you need to receive notifications on the move?

When a call button is pressed it appears on the wristwatch,
the Nurse can cancel the request on the wristwatch, attend to the resident and then cancel at the call point. 
If you are using reporting software then a cancellation on the watch does not trigger a response time. The Nurse must attend to the resident and press the cancel button at the call point. Nurses can also use the system to contact a doctor wearing a wrist watch receiver in emergencies saving time and lives.

nurse call systems

B-Q4
Signal Repeater

Extend your signal to any area of your property

Your retirement home or hospital may need signal repeaters to carry the signal further.
These signal repeaters are installed where the signal falls short. BellMe has successfully installed up to 11 repeaters on the sites that are 600 x 600m in retirement homes & hospitals with 12 repeaters over three floors spanning 250 meters.

nurse call systems

B-99E
Display Panel

Is this screen ideal for your establishment?

Suitable for Retirement homes or specific wards within a Hospital who would like to easily adjust the calling information and additional call buttons as they go.

nurse call systems

B-900
Display Panel

Is this screen ideal for your establishment?

This display panel is ideal for larger Hospitals & Retirement Homes.
If you require more detailed information displayed such as resident name or ward & bed number, then this nurse call display panel is ideal for you. It has a reporting feature integrated and, to ensure call records are captured giving you insight into the response time of your staff, is required to be connected to a PC or laptop.

PRODUCTS - Transmitters

nurse call systems

B-A1-WL
Single Key Call Button

This is our most popular Call Button.

This Call Button Save Lives. 
Used and trusted by many of our Retirement Home and Hospital clientele, this button allows for fast communication between patient or resident and caregiver. A simple push of the button will send out alerts to multiple receivers such as a Display Panel, a Wristwatch receiver and an LED Receiver. One Button can alert the matron or nurse on duty through various methods. The button is durable, waterproof and long lasting ensuring your patient or resident has peace of mind for a lifetime.  

nurse call systems

B-SW2
Call and Cancel Wall Unit

Application: 
Can be mounted at the bedside, shower or toilet in a Retirement home or Hospital. The large Call Button can send out alerts to multiple receivers such as a Display Panel, a Wristwatch receiver and an LED Receiver and the smaller Cancel Button will cancel the call on multiple receivers.

nurse call systems

B-SW-G33
Call and Cancel Wall Unit with Cord

Application: 
Comes with an extended Call Button at the end of the cord
for easy reach and a more convenient press of the button. Can be mounted at the bedside, shower or toilet in a Retirement home or Hospital. 

The large Call Button can send out alerts to multiple receivers such as a Display Panel, a Wristwatch receiver and an LED Receiver and the smaller Cancel Button will cancel the call on multiple receivers.

nurse call systems

B-700
LED Light Receiver

Let our LED Light Guide you for quicker response time

This receiver can be installed above the ward or room entrance situated in the corridors.
It will flash & alert with or without sound. Cancel buttons must be present to disable the light.

Benefits of the B-700 LED

Improve your response time to call for help
Helps the Nurse to quickly identify the room in need without having to return to the nurse station.

nurse call systems

B-700 LED Light Features

Capacity:

This LED Light Receiver can store up to 99 call buttons & requires 1 cancel button. It can be configured by the following two methods: 

  • 49 Call Buttons and 49 Cancel Buttons 
  • 98 Call Buttons and 1 Cancel Button

Alert Tones:

Audio:
The LED has a switch inside the back cover which allows you to change between a beeping noise or silent.
Visual:
This LED light also flashes bright red upon pressing the call button.

Cancel with one or multiple:

The LED light cannot work without a Cancel Button. 
A cancel button is used to stop the light from flashing and making a noise. You can share one cancel button for multiple call buttons or have a cancel button for each call. The configuration would be dependent on what you like displayed on your display panel, so it is compatible with the display information required. Please speak to a consultant to find the best solution for your establishment.

Power:

Even though it is part of our wireless range, all receivers require constant power except the wristwatch receiver. The signal transmits wirelessly from the Call Button to the LED light. The LED light is supplied with the required 12V power supply which is 1m long.

B-700 LED Light FAQs

How loud is the alert and how far can you hear it?

The volume of the alert on the B-700 is 106 db

Can you extend the Power Supply for me if I need a it to be a specific length?

Yes, we can extend a Power Supply for you on request.

What is the warranty on this product?

The LED Light Receiver has a 2-year Fetch and Repair or Replace Warranty. Should we determine that your LED Light needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

nurse call systems

B-700 LED Light Manual

Download the PDF Manual for the B-700 LED Light to get an in-depth look at the features and settings. 

B-700 LED Light Technical Information

Working Voltage:
12V 500mA

Working Current:
<65mA

Standby Current:
<10mA

Working Environment:
-40~80°C

Sensitivity: 
106dB

Volume Output: 
85dB

Dimensions:
104x86x38mm

nurse call systems

B-650
Wristwatch

Do you need to receive a notifications on the move?

When a call button is pressed it appears on the wristwatch,
the Nurse can cancel the request on the wristwatch, attend to the resident and then cancel at the call point. 
If you are using reporting software then a cancellation on the watch does not trigger a response time. The Nurse must attend to the resident and press the cancel button at the call point. Nurses can also use the system to contact a doctor wearing a wrist watch receiver in emergencies saving time and lives.

Benefits of the B-650

Save valuable time in a life-threatening emergency
In a situation where you would like faster response time, not having to go to the Nurse Station to view the details saves you time. The wristwatch gives you an immediate notification while attending to another patient or resident.

nurse call systems

B-650 Wristwatch Features

Wearable on a Lanyard or Wrist:

You have two options: Remove the watch straps and wear the wristwatch on a lanyard or wear it on your wrist.

Capacity:

The wristwatch receiver has a capacity of 200 transmitters. This means a total of 200 Buttons can be programmed to the wristwatch. 

Display Information:

Display either four numbers “0000-9999” or use the first digit as a letter, from A-F. Eg: “A001”-“F999”.

Rechargeable Battery:

Recharge the lithium-ion battery every 2-5 days in a nursing environment (depending on use). Battery life is indicated on the display.

Signal Strength Indication:

You can see the strength of the signal displayed on the wristwatch. If you require it to travel further than the standard 150 meters, add signal repeaters for an extended range of up to 1 km.

B-650 Wristwatch FAQs

How loud are the alerts and how far can you hear it?

The volume of the alert on the B-650 is 85 db.

What is the warranty on this product?

The Wristwatch Receiver has a 2-year Fetch and Repair or Replace Warranty. Should we determine that your Wristwatch Receiver needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

nurse call systems

B-650 Wristwatch Manual

Download the PDF Manual for the B-650 Wristwatch to get an in-depth look at the features and settings. 

B-650 Wristwatch Technical Information

Working Voltage:
3.7V (Li-ion battery)

Working Current:
<900M

Frequency:
433 MHZ +/- 75K

Working Distance:
>150M

Sensitivity: 
85dB

Dimensions: 
65x44x19mm

nurse call systems
nurse call systems

B-650
Limitation

Cancel Buttons

If you use this Cancel Button (B-A1-BC) to attend to the patient or resident you will also have to cancel the call on the wristwatch using its dedicated cancel button.

nurse call systems
nurse call systems

If you are using this Call and Cancel button(B-SW2), because of the integration the cancel button will also cancel the call on the wristwatch. 

nurse call systems

B-Q4
Signal Repeater

Extend your signal to any area of your property

Your retirement home or hospital may need signal repeaters to carry the signal further.
These signal repeaters are installed where the signal falls short. BellMe has successfully installed up to 11 repeaters on the sites that are 600 x 600m in retirement homes & hospitals with 12 repeaters over three floors spanning 250 meters.

Benefits of the B-Q4 Signal Repeater

Give your patient or residents the freedom to move. 
The signal booster extends the range of the Call Button transmission so that your patient or resident does not need to be fearful to move about the establishment, they can have complete peace of mind knowing that their Call Button will reach their caregiver whether they are in the Garden, the TV area or the Canteen.

nurse call systems

B-Q4 Signal Repeater Features

Unlimited Capacity:

The call buttons does not need to be programmed to the repeater.

Antennae:

With two Antennae to help receive and transmit the signal, the device ensures that BellMe sufficiently covers your site with ease.

Power Supply:

The Signal repeater requires a power source and is supplied with a 12V adapter which is 1m long.

Power:

Even though it is part of our wireless range, all receivers require constant power except the wristwatch receiver.

Range:

Our Nurse Call Systems has a range of 100-200m without a Signal Booster. If you add Signal Boosters you can increase the range up to 1km.

Battery Backup:

In case of a power failure, the repeaters have an internal rechargeable battery pack that will power the unit for up to 1.5 – 2 hours.

B-Q4 Signal Repeater FAQs

How do you determine if a signal repeater is needed and how many?

Signal repeaters are strategically placed where the signal falls short and each establishments environment is different depending on various factors. Please speak to a consultant.

Can you extend the Power Supply for me if I need a it to be a specific length?

Yes, we can extend a Power Supply for you on request.

What is the warranty on this product?

The Signal Repeater has a 1-year Fetch and Repair or Replace Warranty. Should we determine that your Signal Repeater needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

nurse call systems

B-Q4 Signal Repeater Manual

Download the PDF Manual for the B-Q4 Signal Repeater to get an in-depth look at the features and settings. 

B-Q4 Signal Repeater Technical Information

Wireless Frequency:
433MHz

Receiving and Transmitting Distance:
up to 200m

nurse call systems

B-99E
Display Panel

Is this screen ideal for your establishment?

Suitable for Retirement homes or specific wards within a Hospital who would like to easily adjust the calling information and additional call buttons as they go.

Benefits of the B-99E

Control your Display Panel with 5 easy-to-use buttonsThe B-99E is popular due to the ease of use and adjusting the programming on the side of the Display Panel in 3 easy steps.

nurse call systems
nurse call systems

B-99E Display Panel Features

Display options:

Wide range of codes available to represent your call areas.
The B-99E has a three digit display. It can display all numbers, and the first digit can either be the following ten alphabets (A, B, C, D, E, F, H, L, P, U) or numbers only.
EG: A01-U99 and / or 000-999.

Rolling Display:

View all calls at a glance. 
If multiple calls come through at the same time, it will roll between each call at the desired interval of 5-99 seconds.

Capacity:

Each display panel has a capacity of 256 buttons. This means a total of 256 Buttons can be programmed to the display panel. The Buttons can be all Call Buttons or a combination of Call and Cancel Buttons depending on how you would like your Nurse Call System to be set up.

Adjustable Volume and Ringtones:

Allows you to adjust the volume to suit your environment.
Choose from a range of 7 different ringtone options that you can choose which best suits your establishment.

Queuing mode:

Attend to multiple calls one at a time. Once you cancel the current call it will show you the next call. You can see how many calls are waiting assistance – the first digit will display the number of outstanding calls.

Auxiliary Out:

Need to hear the Display from a distance?
Connect an external HI-FI to this Display Unit with an Aux Cable to wake up the neighbours.

Cancel Button Compatible:

Choose how your Nurse Call System operates. If you don’t want to use the auto-cancel feature the Display Panel supports 2 types of cancels.

  •  The nurse would have to actively cancel the call button on the screen.
  • The nurse will have to go to the call point and cancel the call via a cancel button at the bedside / call point.

Auto-Cancel:

Convenient and easy to programme. You can choose between 5-99 seconds, how long you want the calling information to stay on the screen before it cancels automatically.

Power Supply

The 99-E requires a power source and is supplied with a DC12V adapter which is 1m long.

B-99E Display Panel FAQs

How loud are the alerts and how far can you hear it?

The volume is adjustable and can go up to 106 dB.

Can you have one button linked to multiple receivers and one receiver to multiple buttons?

Yes, you can have one button linked to unlimited receivers and one receiver linked to 256 buttons.

Can you extend the Power Supply for me if I need a it to be a specific length?

Yes, we can extend a Power Supply for you on request.

What is the warranty on this product?

The B-99E Display Panel has a 2-year Fetch and Repair or Replace Warranty. Should we determine that your Display Panel needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

Is the Display Panel covered for lightning damage under the warranty?

The display panel is not covered for lightning damage under the warranty. We recommend you use surge protector plugs for all display panels, you could also use a UPS and have the display panel run through the UPS to avoid any damage to the screen should the screen get hit by lightning or have power failures.

nurse call systems

B-99E Display Panel Manual

Download the PDF Manual for the B-99E Display Panel to get an in-depth look at the features and settings. 

B-99E Display Panel Technical Information

Working Voltage:
12V

Working Current:
<900M

Frequency:
433 MHZ +/- 75K

Working Distance:
>150M

Sensitivity:
106dB

Audio Output:
2w

Dimensions:
290x158x40mm

nurse call systems
nurse call systems

B-99E
Optional Extra

Backup Power Supply (UPS)

Prevent downtime during those pesky Power Outages.
Get a backup power supply for this Display Panel so that it will be able to run during a power failure.

nurse call systems
nurse call systems

B-99E
Optional Extra

PCB-USB Receiver

Need reporting software? 
The PCB-USB Receiver is an optional extra if purchasing the B-99E. Mainly used to capture the response time of the nurse using the BellMe Reporting Software.

Requirements: 

  • Cancel buttons either built-in or separate.
  • Windows XP or higher PC/Laptop.

Capacity: 
Can store up to 110 Transmitters.
This receiver connects to your PC or laptop to display the calling information on the BellMe Reporting Software.

USB Input: 
It connects via USB and does not require an external power source.

Technical Information:

Dimensions:
125x105x28mm

nurse call systems

B-900
Display Panel

Is this screen ideal for your establishment?

This display panel is ideal for larger Hospitals & Retirement Homes.
If you require more detailed information displayed such as resident name or ward & bed number, then this nurse call display panel is ideal for you. It has a reporting feature integrated and, to ensure call records are captured giving you insight into the response time of your staff, is required to be connected to a PC or laptop.

Benefits of the B-900

Resolve technical issues instantly with Remote Login & Support when connected to a PC or laptop with internet access. If there is lightning damage, we can easily restore your backup file and send it over to you in 24 hours to have your system up and running again. We can log in and make adjustments to call settings or even change wording on the display – saving you precious time that can be better used to run your establishment.

nurse call systems

B-900 Display Panel Features

Display Options:

Distinguish between different areas at a glance.
The B-900 Display Panel shows you up to 10 characters per line, e.g.: “WARD-A RM1”. It has all letters and numbers from A-Z and 0-9. It also can show two calls at the same time. You can also show 4 calls at the same time but this reduces the number of characters you can use.

Rolling Display:

View a list of calls directly from the Display.
If more than two residents press the call button at the same time, it rotates between them allowing you to see who has not received attention. The rolling display can handle up to 20 calls coming through at the same time and will keep rotating between calls.

Capacity:

Each display panel has a capacity of 512 transmitters. This means a total of 512 Buttons can be programmed to the display panel. The Buttons can be all Call Buttons or a combination of Call and Cancel Buttons depending on how you would like your Nurse Call System to be set up.

Alert Output Options:

Need to hear the notification from a distance? 
Use the already onboard sound which is relatively loud, or connect a HI-FI unit to make it sound even louder with the auxiliary out. You can also connect a Siren for an even louder alert.

Ringing Options:

Never miss a call with the Continuous Ringing Feature.
Exclusive to the B-900 the display will continue to output the alert sound until the call is cancelled.
Single Ring or Interval Ringing is also available until the cancel button is pressed.
Listen to the alert to know which ward or area needs help.
You can assign a different ringtone to different wards or areas (up to 7 different ringtones). In addition, each ringtone can be assigned a different volume level.

Auto-Cancel:

Need a Nurse Call System on a budget?
Your Display can be set to auto cancel so you don’t have to install Cancel Buttons. If this feature is on, the software will not be able to report how quickly a resident or patient was attended to.

Back-Up and Restore:

We understand the importance of having 100% uptime.
With this display panel, you will not need to reprogramme the call buttons in the event that it is damaged. The B-900 calling information can be backed up and copied to another display panel and sent to you in the event of an emergency.

Power Supply:

The display panel is supplied with the required 12V Power Supply.

Built-in Integrated Reporting Software:

Save precious time in a critical situation.
The BellMe Software will give you the location of the call displayed on a floor plan via your computer screen allowing you to navigate to the area that needs attention as quick as possible.

Connect a LAN* cable to a PC or Laptop, and you will have access to:

  • When a Call Button is Pressed on your Nurse Call System
  • When a Cancel Button is pressed on your Nurse Call System
  • Floor plan of your property
  • Detailed calling information
  • Statistics and Graphs on response time
  • Export to Excel function to easily share

*Please note, the LAN cable must not exceed 5m and will need to be purchased separately. The software is included with the display panel. 

Provide accountability to your patient or resident’s family.
The BellMe Software can be customized so that the nurse on duty cannot cancel a call from the software screen. The nurse will have to cancel from the call point and then attend to the call. In addition, The BellMe Software captures this information and provides you with recorded proof of the time taken between the patient or resident calling and being attended to. The Software also requires administrative logins which will stay with the Matron or Manager so that the nurse cannot change the settings on the software.

B-900 Display Panel FAQs

How loud are the alerts and how far can you hear it?

The volume is adjustable and can go up to 100 dB.

Can you have one button linked to multiple receivers and one receiver to multiple buttons?

Yes, you can have one button linked to unlimited receivers and one receiver linked to 512 buttons.

Can a call button be programmed as a cancel button?

A Call Button cannot be programmed as a Cancel button. You will need a Cancel button for this.

How do the staff clear the B-900 display when a call comes in?

If you have both Call and Cancel buttons then the call will be cleared from the screen when the Cancel Button is pressed. If you do not have Cancel buttons installed then you can clear the call by pressing the small Function button on the side of the screen. As a 3rd alternative, you can also set the screen to cancel the call automatically.

How do I log into the reporting software?

To log into the reporting software you insert the username: admin and leave the password blank. Hit enter and voila!

How do I link a staff member to the reporting software, so that when the alarm shows on the PC screen, we can see who attended to the patient?

To link a Staff member to specific patients you have to create a Floor Plan and then assign Staff to specific Zones

How to create a Floor Plan:
– Click on Layout
– Right-click on Floor Plan in the Pop-Up box
– Click Add
– Name the Zone as desired
– Press Enter
– Add as many Zones as desired

How to assign a staff member to a zone:
– Click on Staff Settings
– Under Staff Info
– Click on Add
– Complete fields
– Confirm
– Now click on Timetable
– Click on Add
– Complete fields
– Confirm

What is the purpose of the Remote Control?

The remote control is used for programming the Display Panel. It can be used to save transmitters, adjust the ringtone or the ringtone volume, and adjust display settings such as: Display Mode, Rolling Display options, Auto-Cancel and Factory Reset.

Can you use a Power Supply higher than 12V?

We strongly advise not to use a power supply higher than 12V as this will cause damage to the circuit boards and cause the display to not work correctly.

What is the warranty on this product?

The B-900 Display Panel has a 2-year Fetch and Repair or Replace Warranty. Should we determine that your Display Panel needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

Is the Display panel covered for lightning damage under the warranty?

The display panel is not covered for lightning damage under the warranty. We recommend you use surge protector plugs for all display panels, you could also use a UPS and have the display panel run through the UPS to avoid any damage to the screen should the screen get hit by lightning or have power failures.

Are BellMe screens compatible with other nurse call systems?

No, we do not recommend using another systems items with our screens as our Nurse Call System works on a radio frequency of 433MHa and we cannot guarantee that another system other than our own will be compatible.

What are the PC requirements for BellMe Software?

The computer running the BellMe Reporting Software needs to have Windows XP or higher. If your hospital or retirement home is going to make use of the reporting feature you will also require a LAN Cable that needs to be connected from the display panel to a computer. We recommend not using a cable longer than 5m to ensure accuracy.

Can you extend the Power Supply for me if I need a it to be a specific length?

Yes, we can extend a Power Supply for you on request.

nurse call systems

B-900 Display Panel Manual

Download the PDF Manual for the B-900 Display Panel to get an in-depth look at the features and settings. 

nurse call systems

B-900 Display Panel Software

The B-900 Display Panel comes with Built-in Integrated Reporting Software. The software below will need to be installed on your computer in order to view the captured information and get Call notifications on your computer.

You can download the BellMe Software here

B-900 Display Panel Technical Information

Display Panel:

Working Voltage:
DC 12 V

Working Current:
<100 mA

Frequency:
433 MHZ +/- 75K

Audio Out Power:
1 W

Recovered Sensitivity:
100db

Remote Control:

Working Voltage:
9 V

Working Current:
15mA

Frequency:
433 MHZ +/- 75K

Power Adapter:

Working Voltage:
12 V

Working Current:
1 A

Dimensions:
535x158x40mm

nurse call systems
nurse call systems

B-900
Optional Extra

Backup Power Supply (UPS)

Prevent downtime during those pesky Power Outages.
Get a backup power supply for this Display Panel so that it will be able to run during a power failure.

B-A1-WL
Single Key Call Button

This is our most popular Call Button.

This Call Button Save Lives. 
Used and trusted by many of our Retirement Home and Hospital clientele, this button allows for fast communication between patient or resident and caregiver. A simple push of the button will send out alerts to multiple receivers such as a Display Panel, a Wristwatch receiver and an LED Receiver. One Button can alert the matron or nurse on duty through various methods. The button is durable, waterproof and long lasting ensuring your patient or resident has peace of mind for a lifetime.  

Benefits of the Single Key Call Button

5 Year Warranty:

We have complete faith that our Buttons will continue to Save Lives,
Which is why we recently increased our Warranty on all Call Buttons from a 2-year to a 5-year warranty as of May 2018. If your Button happens to give you any issues that are covered under your warranty we will even give you a replacement unit until we resolve your technical issue.

100% Waterproof:

This call Button can be taken into high risk areas such as bathrooms, toilets and showers.
It allows the patient or resident to take their trusty Call Button into the shower or out into the garden so they don’t have to fear falling down and waiting for hours before someone finds them.

Dual Purpose Application:

1 – Wearable:
A lanyard can be connected to the back-mounting section and can be used around the neck by the patient or resident so that they have the freedom to move around and not be confined to the area that their button is located. They can press the call button wherever they are.

Dual Purpose Application:

2 – Mountable:
Alternatively, it can be wall mounted as it comes with a wall mounting bracket. You can drill it into the wall with the mounting bracket or use very strong 2-way tape. The Call Button can be mounted on any flat surface within the room and other high risk areas such as toilets, bathrooms and showers as they are completely waterproof.

Single Key Call Button Features

Easy to Press:

Your patient or resident may be weak or not have enough energy to push a firm button so our Buttons come with a large surface area that can be triggered on a soft rubber with a slight press. The rubber surface on the button is also indented to prevent an accidental press.

Long Lasting Battery Usage:

Requires an A23 battery which lasts up to 1-2 years in a Nursing environment. The Call Button is supplied with a special key which allows you to remove the backing and unscrew the casing in order to change the battery.

Pre-programmed with a Unique Code:

Each call button has a unique code which can be saved to display anything you would like. This is especially useful if you are using the B-900 Display Panel which allows you to paste the unique code for quick programming via the BellMe Software.

Single Key Call Button FAQs

Can the buttons be worn on a wristband?

Currently our buttons do not come with the option of wearing them on your wrist, however our manufacturers are busy working on this solution. Please speak to a consultant.

Can you have one button linked to multiple receivers?

Yes, you can have one button linked to unlimited receivers.

Can you have one receiver to multiple buttons?

Yes, the amount of buttons that can be linked to one receiver is determined by which receiver you select. Please refer to the Receiver or speak to a consultant.

What is the warranty on this product?

As of May 2018, the Single Key Call Buttons have a 5-year Fetch and Repair or Replace Warranty. Single Key Call Buttons purchased prior to May 2018 carry a 2-year Fetch and Repair or Replace Warranty. Should we determine that your Call Button needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

Single Key Call Button Technical Information

Dimensions:
60x60mm

Transmission Distance:
300m in an open area

Battery:
A23

Radio Frequency:
433MHz

nurse call systems
nurse call systems

Single Key Cancel Button
Optional Extra

Cancel Button

This button is usually placed at the door to cancel calls coming from that section / ward. If you are sharing a cancel button with multiple call buttons then your display screen will have to display the same calling information for the multiple call buttons.

Monitor Response Time:

If you would like to have the response time of the Nurses captured via the BellMe Software. The nurse would have to actively cancel the call button either on the screen or a cancel button at the bedside or call point for the call to be removed from the display.

Mountable:

The Cancel button is mountable exactly like the Call Button. It comes with the mounting bracket and can be mounted with strong 2-way tape or drilled.

Cancel One Call or Cancel All:

You can choose how you set up the cancel button to cancel calls for an entire section/ward or have one cancel button for each call button.

Sharing a Cancel Button:
This button is usually placed at the door to cancel calls coming from that section / ward. If you are sharing a cancel button with multiple call buttons then your display screen will have to display the same calling information for the multiple call buttons.

Individual Cancel Buttons:
The button can be wall mounted near the Bedside Call Buttons or in the Toilets or Shower.

nurse call systems

B-SW2
Call and Cancel Wall Unit

Application: 
Can be mounted at the bedside, shower or toilet in a Retirement home or Hospital. The large Call Button can send out alerts to multiple receivers such as a Display Panel, a Wristwatch receiver and an LED Receiver and the smaller Cancel Button will cancel the call on multiple receivers.

Benefits of the Call and Cancel Wall Unit

Save costs with this integrated button.
The call and cancel are both treated as one button so if your display has a capacity of 512 then you can have 512 residents with this button by their bedsides. The integrated cancel button will also monitor the response time of the nurse.

Prevent multiple calls.
The smaller cancel button will light up when the large call button is pressed as confirmation that the call has gone through. This gives the patient or resident peace of mind that they will be attended to and prevents them from pressing the button multiple times in order to ‘make sure’ that their call went through. 

Call and Cancel Wall Unit Features

100% Waterproof:

This call Button can mounted in high risk areas such as bathrooms, toilets and showers. Your patient or resident will be able to call out for help immediately with a simple push of a button.

Batteries:

Takes A23 Battery which can last 1-2 years depending on use. When this LED starts to flicker at a slower pace, this means the battery is draining and may need replacement within 2-4 months from the beginning of a slight flicker. The flicker will get more prominent.

Integrated Cancel Button:

The integrated cancel button allows the nurse to cancel the call at the call point, whether it is in the patient or resident’s room, toilet or shower.

Mountable:

This button can be wall mounted with screws and is supplied with the built in mounting bracket. Alternatively you can use strong double-sided tape

Call and Cancel Wall Unit FAQs

Can this button be worn on a lanyard?

No, if you require a button on a lanyard, please refer to our Single Key Call Buttons.

Is this button Waterproof?

Yes, BellMe Buttons are 100% waterproof.

How often do I need to change the battery?

This button makes use of an A23 battery and can last 1-2 years depending of usage.

What is the warranty on this product?

The Call and Cancel Wall Unit has a 2-year Fetch and Repair or Replace Warranty. Should we determine that your Call Button needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

Call and Cancel Wall Unit Technical Information

Transmission Distance:
200m in line of sight

Dimensions:
85x85x15mm

Radio Frequency:
433MHz

nurse call systems

B-SW-G33
Call and Cancel Wall Unit with Cord

Application: 
Comes with an extended Call Button at the end of the cord
for easy reach and a more convenient press of the button. Can be mounted at the bedside, shower or toilet in a Retirement home or Hospital. 

The large Call Button can send out alerts to multiple receivers such as a Display Panel, a Wristwatch receiver and an LED Receiver and the smaller Cancel Button will cancel the call on multiple receivers.

Benefits of the Call and Cancel Wall Unit with Cord

The call button at the end of the cord can be placed by the bedside for a more convenient press of the button. This unique Call Button has a built-in call and cancel button with an extended Call Button on a cord. 

The call and cancel are both treated as one button so if your display has a capacity of 512 then you can have 512 residents with this button by their bedsides. The integrated cancel button will also monitor the response time of the nurse. 

 
nurse call systems

Call and Cancel Wall Unit with Cord Features

Response Time Tracking:

This Call button has an integrated cancel button to monitor the Nurse’s Response Time.

Length:

The Cord Length is 60 cm (coiled up) – 1.5 meters extended.

Mountable:

It also has a wall bracket holder for the extended call button.
This call button comes with a built-in bracket for mounting purposes.

Call and Cancel Wall Unit with Cord FAQs

How often do I need to change the battery?

This button makes use of an A23 battery and can last 1-2 years depending on usage.

What is the warranty on this product?

The Call and Cancel Wall Unit with Cord has a 2-year Fetch and Repair or Replace Warranty. Should we determine that your Call Button needs to be returned to us for repairs, we can provide you a replacement unit until we resolve your technical issue.

Call and Cancel Wall Unit with Cord
Technical Information

Transmission Distance:
300m in line of sight

Radio Frequency:
433MHz

Dimensions:
85x85x15mm (panel)